Services – Sandblasting – Sandblast in Malta, Old Paint – Rust – Corrotion – Impurities and Unwanted Elements – Removing Restoration process.

What is Sandblasting ?  Why, How & Where is needed?

 

 Iron Malta Sandblasting Restoration Services in Malta.

 

 

..

Sandblast is a process that remove the following list .

 

  •   Old Paint

 

  • Rust from Iron

 

  • Impurities

 

  • Unwanted Element

 

  • corrosion cleaning process

 

WHAT IS SANDBLASTING ?

Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by sand, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.

A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust. Sandblasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material.

.
Sandblast process – makes wrought iron more clean and refined

Definition of refined: without impurities and unwanted elements, will be removed in the  process.  = (smoother quality)

 
c58-7cb18 manufacturing process  stairs iron malta .com high quality works.jpg7cb19 manufacturing process  stairs iron malta .com high quality works.jpg7cc20 manufacturing process  stairs iron malta .com high quality works.jpg7cc21  stairs iron malta .com high quality works Sandblased.jpgc43-3eb15 stairs iron malta .com high quality works.JPGc93-3eb16 stairs iron malta .com high quality works.JPG7cc24 stairs iron malta .com high quality works Sandblasting 3.jpg7cc23 stairs iron malta .com high quality works Sandblasting 2.jpgc22-4dd36 stairs iron malta .com high quality works.jpgc29-4dd34 stairs iron malta .com high quality works.jpgc38-4dd35 stairs iron malta .com high quality works.jpgc15-4dd38 stairs iron malta .com high quality works.jpgc77-4dd37 stairs iron malta .com high quality works.jpg7cc26 stairs iron malta .com high quality works.jpg7cc25 stairs iron malta .com high quality works Sandblasting 4.jpg7cc22 stairs iron malta .com high quality works Sandblasting 1.jpg3eb14 stairs iron malta .com high quality works.JPG3eb13 stairs iron malta .com high quality works.JPG
Sandblast process – brings the material more smoother

Definition of smoother : having an even and regular surface; free from perceptible projections, lumps, or indentations

 

ferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 2b.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 8.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 8c.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 8b.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 5.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 6.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 3b.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 3a.JPGferro battuto malta iron metal steel works malta stairs iron malta .com quality refined works not sandblasted sandblasting no painting 3c.JPG

Raw Wrought Iron – Not Sandblasting – Not Painted

Definition of Raw wrought iron : In it’s proper form, texture, iron material, the original color of wrought iron, during the manufacturing process

WHAT IS A TYPICAL SANDBLASTING PROCESS?

Sandblasting is the process of using compressed air to propel abrasive media at a surface to clean, (usually paint & rust),debur, or to prepare a surface for a coating of some sort.

There are two kinds of sandblasters: “Suction” / “Siphon”” & “Pressure” Blast Systems. Pressure systems are ten times faster & much more effective, but also quite a bit more expensive.

There are two basic kinds of sand blasters: Blast Cabinets & Portable Blasters

There is a huge variety of abrasive blast media out there each has its purpose. One you want to stay away from is Silica Sand. Blasting with Silica sand causes Silicosis of the lungs…Do Not Ever Use It!!!

If you are looking to blast hand tools, such as saw blades, wrenches, etc., I’d recommend blasting them in a sandblast cabinet. (A “Suction/Siphon” cabinet would probably be sufficient…)

Sandblast Cabinets have adequate lighting, a dust collector, and two gloves you place you hands inside to blast within the cabinet. One nice part about blasting inside a cabinet is that all the dust is contained, so no respirator is needed. They are also relatively quiet, and some have abrasive separators which allow you to get the maximum life out of the abrasive blast media & consequently save money.

For cleaning – removing rust and corrosion, or even old layers of paint from wrought iron – metal – steel – works

Home improvement & remodeling service in Malta

Soft blasting can save your work and your old galvanizing. (if it’s not to late)

 

Services we offer:

Process: removing your old work – from site.

than we have a soft blasting treatment, that will save your old galvanizing.

than we re paint it with epoxy primer as an undercoat protraction.

and finally hardener spray painting finishing will be applied on your work and will look fresh like new.

and we will re fixing everything work onsite.

 

This service is ideal for balcony – balconies – railing – railings – fancies – stairs – staircase – handrails – banisters – gate – gates – doors –  windows – security grills – security guards – garage doors – garden and indoor furniture and much much more.

 

Sand blast – Sandblast – Grit blast – Shot blast – Soft blast – Abrasive blast . MALTA EUROPE EUROPEAN SYSTEM

Sandblasting – Sand blasting – Grit blasting – – Shot blasting – – Soft blasting – Abrasive blasting – MALTA EUROPE

For info call Tel: +356 21237820 Mob: 79604517

..

Due to occasionally on site jobs,

we highly recommend to call and confirm we are on premises

Tel: +356 21237820 Mob: 79604517